A-1 Plumbing Services
Mill Spring, NC · 28756 Local. Independent. Toilet specialists.

ADA Toilet Installation in Mill Spring, NC Near Me

ADA toilet installation in Mill Spring, NC: 17 to 19 inch seat, 16 to 18 inch centerline, flush on the open side. Call (866) 303-3394.

Call (866) 303-3394 More services
Local plumbers
Repair or replace, your call
Price talked through first
One phone call to book

ADA Toilet Installation in Mill Spring, NC

An ADA-compliant toilet has a seat height between 17 and 19 inches, measured from the floor to the top of the seat. The 2010 ADA Standards also place the toilet centerline 16 to 18 inches from the side wall and call for grab bars on the side and rear walls.

A-1 Plumbing Services connects Mill Spring, NC homes and businesses with plumbers who install ADA toilets with those measurements in mind. The flush control goes on the open side of the toilet and should work without tight grasping or twisting.

In a private home, these numbers are a good guide rather than a legal requirement. In a business, office or public restroom, the ADA and the local building code both apply, and the plumber can work with the contractor on clearances and blocking for the grab bars.

Both floor-mount and wall-hung ADA models are available.

Call A-1 Plumbing Services at (866) 303-3394 for ADA toilet installation in Mill Spring, NC.

How it works

Getting toilet repair booked in Mill Spring, NC

01

Tell us what the toilet is doing

Running, rocking, leaking at the base or flushing weak. Each symptom points to a different part.

02

Talk through the price

We go over the likely fix and the price on the phone, then book a local plumber for Mill Spring, NC.

03

Visit booked

A local plumber comes out at a time that works for you.

04

Fixed and tested

The plumber flushes it several times and checks the base and tank bolts before leaving. You pay the plumber directly.

Coverage

Toilet Repair Services Across Mill Spring, NC

Toilet repair and toilet installation for the neighborhoods and ZIP codes around Mill Spring, NC.

ZIP codes we serve

28756
ADA Toilet Installation in Mill Spring, NC

Toilet repair FAQs

Common questions about toilet repair and toilet installation

Questions we hear most often about ADA Toilet Installation in Mill Spring, NC.

Talk to a person
Why does my toilet keep running?
Nine times out of ten it is the flapper, the fill valve set too high, or a lift chain that is too short. A food coloring test in the tank tells you if the flapper is leaking.
Why does my toilet refill by itself every so often?
That is a ghost flush. Water is slowly leaking from the tank into the bowl, usually past a worn flapper or a pitted flush valve seat, until the fill valve kicks on to top it up.
What is the difference between a 1.28 and a 1.6 gallon toilet?
1.6 gallons per flush is the federal maximum. 1.28 gallons is the high-efficiency standard used by WaterSense and required by law in several states, including California, Texas, Colorado and Georgia.
Is a comfort-height toilet worth it?
For taller adults and anyone with knee or hip trouble, usually yes. The seat sits at 17 to 19 inches instead of about 15. Small children may find it harder to use.
Can a wall-hung toilet be repaired without opening the wall?
Usually yes. Most in-wall tanks have an access panel behind the flush plate, so the fill valve and flush valve can be reached from the front.

Get a toilet repair price

Need Toilet Repair in Mill Spring, NC? Call now.

Local plumbers for toilet repair and toilet installation in Mill Spring, NC. Call (866) 303-3394 and go through the job and the price before anything is booked.

Call (866) 303-3394 Browse services
Call (866) 303-3394 Services